Reliance

Reliance Interview Questions and Tips

Showing 21 - 30 of 58 interviews

21

Reliance Get interview

4.7k views
AnonymousFresherSelected
Application
I was interviewed on-campus for Get role at Reliance
Interview Process
Test Technical Interview
Round 1

Test

Duration
25+30 Minutes
No. of Questions
30+50 questions
Test Sections
  • Section 1: Aptitude Test
  • Section 2: Technical Test
Interview Experience
Questions of aptitude test were of good level but if you have good practice you could complete it in given time i.e. 25 mins.Technical test was comparatively easier and not much wait-age was given to it. They shortlisted on the basis of aptitude test.
Interview Tips
Practice aptitude as much as possible from India bix or other sites. Have a look of old papers of RIL(quest. might repeat)
Round 2

Technical Interview

Interview Questions
  • Question 1: Introduce yourself
  • Question 2: what is the composition of LPG cylinder?
  • Question 3: Why the composition of LPG cylinder varies in North and in South?
  • Question 4: Would you go for higher studies?
  • Question 5: What if the formula for heat engine? Explain with an example.
Interview Experience
Questions were very logical. interviewer was very chill man. He was asking questions very lightly. I was never in a position of stress.
Interview Tips
Know ur basics. Prepare a very good(impressive) answer of the 1st question because it's makes ur 1st impression on the interviewer. If you are planning to go for higher studies don't say that you want to otherwise they will ask you why are u sitting for placement so, it's better to say lie. Be confident. Eye contact is very necessary. Dress properly for interview as HRs notice etiquettes.
Skills

Skills Tested

Skill Tips
To improve communication skills read newspaper loudly or in front of a mirror( not reading in ur mouth).Read novels.
Resources

Preparation materials

Books
  • Novels,
General Tips
Use your third year’s summer break to prepare for the placement process.You should have a strong technical background and must have your basics crystal clear.You should have good aptitude & communication skillsYou should have good enough answers for the universal questions like tell me about yourself, and others. Make sure you know everything you have written in your resume and follow the standard college format while making your resume.Make yourself thorough in at least one of the core subjects.Prepare your internship and projects thoroughly.Always maintain eye to eye contact with the recruiters. Be confident.Have thorough knowledge about respective companiesi.e. technologiesthey are working on, because interview questions aregenerally asked on this.Dress properly for interview as HRs notice etiquettes.Try and have mock sessions for group discussions as well as interviews rather than just reading about it .It will definitely help you out.
Motivation for applying
Since, I wanted to be in a core company so, the ideal company(out of the companies which visit my campus) for me to gain experience and learn how to work in industry is RIL as they give rigorous training of 1 year to the freshers so, that they learn all the basics of industry.
Read Full post...
22

Reliance Get ( graduate engineer trainee ) interview

371 views
AnonymousFresherSelected
Application
I was interviewed on-campus for Get ( graduate engineer trainee ) role at Reliance
Interview Process
Test Technical Interview
Round 1

Test

No. of Questions
80 questions
Test Sections
  • Section 1: Aptitude
  • Section 2: Technical
Interview Experience
30 questions in 30 minutes for aptitude section and 50 questions in 30 minutes for technical section.sectional cutoff was there. questions were easy; especially in technical section no calculation was required. questions were mostly from machine design, heat and mass transfer, metallurgy and few questions from other subjects like SOM, KOM, thermodynamics, industrial(basic). Aptitude section was comprised of quantitative(time and distance, mixtures, etc), verbal reasoning(antonyms, synonyms, etc), logical reasoning(pattern identification, odd one out, etc.).
Interview Tips
Practice from indiabix as many questions were directly from there. mechanical handbook for GATE will also be useful.
Round 2

Technical Interview

Interview Experience
first question was tell me about yourself, this is the question where you have to give the direction to the interview. after my basic introduction(family, education) i described my projects. interviewer just want to check your interest in engineering and concepts. prepare well
Read Full post...
23

Reliance Process engineer internship interview

1.3k views
Sai VamshiFresherSelected
Application
I was interviewed on-campus at IIT Madras for Process engineer role at Reliance
Interview Process
Test Test
Round 1

Test

Duration
30 min Minutes
Test Sections
  • Section 1: Aptitude
Interview Experience
Easy paper with some english questions
Interview Tips
Anyone who cracked jee can manage it
Round 2

Test

Duration
30 min Minutes
Test Sections
  • Section 1: Technical
Interview Experience
Questions on chemical engineering are asked. All are theoretical based. Thermodynamics questions were little hard
Interview Tips
Concentrate on mass heat and momentum transfer and thermodynamics. Basic level is fine
Read Full post...
24

Reliance Process engineer internship interview

1.4k views
Arun VargheseFresherSelected
Application
I was interviewed on-campus at IIT Madras for Process engineer role at Reliance
Interview Process
Resume Shortlist Test
Round 1

Resume Shortlist

Interview Experience
It was a pretty simple process. Almost everyone will clear this round.
Interview Tips
Focus mainly on your academics
Round 2

Test

Duration
30 Minutes
No. of Questions
30 questions
Test Sections
  • Section 1: Mathematics
  • Section 2: Chemical Engineering
Interview Experience
It was pretty simple and easy.
Interview Tips
Just focus on your basics and practice more to increase speed.
Skills

Skills Tested

Skill Tips
Prctise more to increse speed.
General Tips
Practise more to increase speed.
Motivation for applying
one of the top companies in India
Read Full post...
25

Reliance GET ( GRADUATE ENGINEER TRAINEE ) interview

92 views
AnonymousFresherSelected
Application
I was interviewed on-campus for GET ( GRADUATE ENGINEER TRAINEE ) role at Reliance
Interview Process
Test HR Interview
Round 1

Test

Interview Experience
The selection criterion was the CGPA. After that we had the written test. There were two objective question based tests, each having 30 questions and a duration of 30 minutes. The first test was an aptitude test – quite a few questions were from time and work, time, speed, distance etc.

There was a second written test for core subjects (mechanical engineering and metallurgy engineering). The test had majority of the questions from mechanical engineering – hence the metallurgy engineering guys were at some degree of disadvantage.
Interview Tips
Prepare for aptitude, even if you are not preparing for CAT. Not clearing the test gives a very bad feeling.
Round 2

HR Interview

Interview Experience
In the interview round they asked me about myself. They also asked me about my family background, there was a CV check, they talked to me about my passion for mechanical engineering, and after that interviewer asked me to relate my projects and internship with my passion.

Last question he asked was about my interest, and my favourite pastime which led to a long conversation over ‘The Alchemist’.

They were looking for candidates who were confident about themselves and who would stick with the organization for long term.
Read Full post...
26

Reliance Get ( graduate engineer trainee ) interview

17 views
AnonymousFresherSelected
Application
I was interviewed on-campus for Get ( graduate engineer trainee ) role at Reliance
Interview Process
Test Technical Interview
Round 1

Test

Test Sections
  • Section 1: Aptitude
  • Section 2: Technical questions
Interview Experience
There were around 30 aptitude questions which i think you have to complete in around 30 minutes. There were around 50 Technical questions.
After the written test there was a single interview for shortlisted candidates.
Round 2

Technical Interview

Interview Questions
  • Question 1: questions related to Industrial Instrumentation
  • Question 2: about your projects
  • Question 3: about your internships
Interview Experience
Since I am from instrumentation and control branch, questions on flow meters and from industrial instrumentation were asked. Basics were checked. Questions related to your projects, PLC and SCADA
Interview Tips
Prepare your projects very carefully. Be confident. Be honest.
Read Full post...
27

Reliance Process engineer internship interview

1.3k views
Arun VargheseFresherSelected
Application
I was interviewed on-campus at IIT Madras for Process engineer role at Reliance
Interview Process
Test Resume Shortlist
Round 1

Test

Duration
30 Minutes
No. of Questions
30 questions
Test Sections
  • Section 1: Chemical
Interview Experience
It was pretty simple and easy.
Interview Tips
Just know the basics.practise more to do fasrt.
Round 2

Resume Shortlist

Interview Experience
It was not hard to pass this shortlisting.
Interview Tips
Have more stress on academics.
Read Full post...
28

Reliance Get ( graduate engineer trainee ) interview

4.1k views
Ajay KumarFresherSelected
Application
I was interviewed on-campus at NIT Surathkal for Get ( graduate engineer trainee ) role at Reliance
Interview Process
Test Technical Interview
Round 1

Test

Test Sections
  • Section 1: WRITTEN TEST
Interview Experience
Written test- both aptitude and the core subjects. In Core subject 50 Questions 30 minutes. In Aptitude 30 Questions in 30 minutes. The level of aptitude would be average but the core paper dealt with a lot of basics. For electrical people, a lot of questions were from transformer and induction machine, synchronous machine, Power system, Power electronics basics, Power plant engineering, and switchgear & protection devices. Thirteen people from EEE had appeared for the test
Round 2

Technical Interview

Interview Experience
They basically look for two qualities, first you have knowledge of the core subjects and second that you would stick with the company at least for some years.
Skills

Skills Tested

Skill Tips
Try to stick to the core and basically Transformer and machines, switchgear and protection, do not go towards the other subjects of interests as they are not looking for that profile. Be calm, they might look a bit serious people, but they make you very comfortable during interview.
Resources

Preparation materials

Books
  • Machines by nagrath and kothari,
  • V K MEHTA POWER SYSTEM,
  • Quantitative Aptitude by Arun Sharma book ,
Read Full post...
29

Reliance Graduate engineer trainee interview

4.4k views
Sudeep ManjunathFresherSelected
Application
I was interviewed on-campus at NIT Surathkal for Graduate engineer trainee role at Reliance
Interview Process
Test Other Interview
Round 1

Test

Duration
60 Minutes
Interview Experience
Apti followed by technical test 1hr each.
Round 2

Other Interview

Interview Experience
Shorlisted candidates were called for interview.
Skills

Skills Tested

Skill Tips
Think smart and do your best in the test, do not badger yourself with tough & complex questions. Be thorough with basic concepts especially the elementary things. Interview questions will cover diverse topics from various fields. They do not expect you to be an expert in everything, but you will have to know basics for example- I was asked working of an IC engine, Eddy current phenomena and how its employed as testing method, wrought vs cast products, etc. If you do not know something, be frank and say it loud and clear.
General Tips
HR interview was the toughest. Rapid fire questions - will let you no time to think. Unless you answer them carefully & wisely they will find a way to pull your legs. Do not get depressed if you are rejected. It is definitely not that others are better than you- only luck was on their side. Every company that registers will bring you ample opportunity to manifest your learning in this college, you will realize that the wait was worth it only on the day you get placed.
Read Full post...
30

Reliance Graduate trainee engineer interview

340 views
AnonymousFresherSelected
Application
I was interviewed on-campus for Graduate trainee engineer role at Reliance
Interview Process
Test HR Interview
Round 1

Test

Test Sections
  • Section 1: Aptitude
  • Section 2: Technical
Interview Experience
The test was for 1 hour . It consisted of aptitude and technical sections each for 30 mins. Technical was of gate level questions and aptitude was a basic math test with some verbal ability questions.
Round 2

HR Interview

Interview Experience
It was a basic HR interview for about 30 minutes. And mostly the selection was based on the test scores so if you have done well in the test you are almost selected for the job
Read Full post...
SignUp/Login
1-Step Login | Get unlimited access!