Qualcomm

Page 4 of 5 for Qualcomm Interview Questions and Tips

Showing 31 - 40 of 48 interviews

31

Qualcomm Associate engineer interview

, 12.2k views
Vikram GanapathineediFresherSelected
Application
I was interviewed on-campus at IIT Madras for Associate engineer role at Qualcomm
Interview Process
Test Technical Interview HR Interview
Round 1

Test

Test Sections
  • Section 1: Aptitude test
  • Section 2: Technical
Interview Experience
aptitude was as usual.
Technical was tough. lots of concepts were revisited. Digital systems, analog circuits, Computer Oraganization etc.
Interview Tips
For aptitude general prep for placements is enough.
If you want to get seriously placed for Qualcomm then you must be thorough with all the courses i mentioned.
Only Mtechs have cleared the test. Even in the extended shortlist there were no Btechs. Everyone may not be lucky as myself in getting a Walk-in interview.
Round 2

Technical Interview

Interview Experience
Basic questions on Digital Systems. Some aptitude questions.
General questions about interests and future goals.
Interview Tips
Questions were easy if u have prepared even a little bit.
Get shortlisted for interview and then it must be easy to crack.
Round 3

HR Interview

Interview Experience
Maybe i was already hired, as no questions were asked. She actually gave me an idea of how the work is going to be in Qualcomm Chennai.
Interview Tips
Just clear the test and tech interview and you most likely will get the job.
Skills

Skills Tested

  • Digital Systems
Resources

Preparation materials

Books
  • Morris Mano,
General Tips
Prepare well and be cool during the interviews.
Motivation for applying
Its core and a well established MNC with lots of future possibilities.
Read Full post...
32

Qualcomm Associate engineer interview

, 4.1k views
AnonymousFresherSelected
Application
I was interviewed on-campus for Associate engineer role at Qualcomm
Interview Process
Test Technical Interview
Round 1

Test

Interview Experience
It contained 3 sections: Aptitude Questions, Programming questions and third section depending on which profile the candidate is opting for, which contained CS,VLSI or DSP profile. Programming: Pseudo code questions which required to find the output of code or the code which resulted in specific output.
Interview Tips
Answer all questions since there was no negative marking (at least this time).
Round 2

Technical Interview

Interview Experience
I had three interviews out of which the first two were technical and third H.R. The interview started with a personal question. Then I was aked about my project in detail. Knowing what projects you did and basic details which constitute the base of the project is must. The next question was about designing a FSM. And the following interview was based on general VLSI based questions mainly setup-hold time, power consumption reduction techniques etc and some puzzles.
Interview Tips
Knowing the basics about subjects and projects is most important.
Skills

Skills Tested

  • HDL
Skill Tips
For VLSI part a HDL is needed and knowing software related to VLSI CAD is added advantage. Also good logical ability and problem solving skill helps since they ask puzzles and digital design problems.
General Tips
High CGPA is helpful but your answers in interview are<br />
more important.
Read Full post...
33

Qualcomm Associate engineer interview

, 3.7k views
Shreyansh AnkitFresherSelected
Application
I was interviewed on-campus at NIT Surathkal for Associate engineer role at Qualcomm
Interview Process
Test Technical Interview HR Interview
Round 1

Test

Test Sections
  • Section 1: ONLINE TEST
Interview Experience
I was offered a pre-placement offer from Qualcomm. For the selection of interns we had an online test of 1 hour.
Interview Tips
Make sure that you are thorough with both analog and digital concepts. Books like Gaikwad, Morris Mano and Givone are useful.
Round 2

Technical Interview

Round 3

HR Interview

Skills

Skills Tested

Skill Tips
Try keeping your answers to the point and be confident. There is no shame in admitting that you dont know a particular answer. Most importantly, believe in yourself. Have a strong base in analog and digital. Knowledge in coding in C, Python and Perl can be handy too.
General Tips
As Qualcomm is one of the best electronic companies, competition was tough. Getting through was really challenging, but at the end there is nothing more rewarding than getting a placement.
Read Full post...
34

Qualcomm Associate engineer interview

, 4.3k views
AnonymousFresherSelected
Application
I was interviewed on-campus for Associate engineer role at Qualcomm
Interview Process
Test Technical Interview HR Interview
Round 1

Test

Duration
120 Minutes
Test Sections
  • Section 1: ONLINE TEST
Interview Experience
Questions asked from core in CAT formatI prepared for test by focussing on topics:
1.Digital Circuits
2.Digital IC designs
3.C programming
Round 2

Technical Interview

Interview Experience
There were two Technical interview.during the course of each interview, you will have to solve a lot of digital circuit design problems.
1st Interview(Extremely localized and in depth)
1.Verilog (design of sequential circuits)
2.FSM Design(Sequence detection and coding it in verilog)
3.Digital circuit topologies(Design choices made on the basis of topologies)
4.Digital circuit Design(problem solving)
5.Timing Analysis(cause of violation and rectification)
2nd Interview(very diverse set of topics)
1.Verilog state machines(very detailed)
2.Digital verification
3.Quantum Physics(minor)(poisson bracket(commutability and eigen basics))
4.Control systems(phase and gain margins)
5.Communication systems (SNR and modulation techniques)
Round 3

HR Interview

Interview Experience
Questions were asked from work location preference
Interview Tips
Mainly questions are asked from work location preference so you have to clear about work location preferences
Skills

Skills Tested

  • Digital IC Design
  • CAD for VLSI
  • Computer Architecture
Skill Tips
Reading alone will not help.you need to solve problems on these topics
General Tips
Keeping in touch with see programming helps a lot.<br />
Learning Data structure and algorithms seems to give you an edge.
Read Full post...
35

Qualcomm Associate engineer interview

, 4.1k views
AnonymousFresherSelected
Application
I was interviewed on-campus for Associate engineer role at Qualcomm
Interview Process
Test Interview Interview
Round 1

Test

Duration
120 Minutes
Interview Experience
The online test consists of Quant, core (basic digital, devices, signals), C programming.
Interview Tips
Lots of online resources will aid you in the process.
Focus on courses like Digital IC Design, CAD for VLSI and Computer Architecture. 
Preparing for CAT improves number of options (non-core and core wise) and reduces stress. 
Keeping in touch with C programming helps a lot.
Learning Data Structures and Algorithms seems to give you an edge.
Round 2

Interview

Interview Experience
Interview is held in 3 rounds – one HR round and two technical rounds.Round duration can vary from 40 minutes to 1 hour.First Interview (Extremely localized and in depth) : 1. Verilog( Design of sequential circuits )2. FSM design (Sequence detection and coding it in Verilog) 3. Digital circuit topologies (Design choices made on the basis of topologies) 4. Digital circuit design (Problem solving) 5. Timing analysis (Cause of violations and rectification)Second Interview (Very diverse set of topics):1.Verilog state machines (Very detailed) 2.Digital verification 3.Quantum Physics (Minor) (Poisson Bracket (commutability and Eigen basis))4.Control systems (Phase and gain margins) 5.Timing analysis (Set up and hold time violations) 6.Communication systems (SNR and modulation techniques)
Round 3

Interview

Interview Experience
General set of HR questions are asked.
Skills

Skills Tested

    Skill Tips
    ""
    Read Full post...
    36

    Qualcomm Associate engineer interview

    , 3.8k views
    AnonymousFresherNot Selected
    Application
    I was interviewed on-campus for Associate engineer role at Qualcomm
    Interview Process
    Test Other Interview
    Round 1

    Test

    Test Sections
    • Section 1: Online test (Either VLSI or DSP along with math)
    Interview Experience
    The placement website mentioned that you can choose either the VLSI stream or the DSP stream and the online test was held accordingly. I wrote the DSP test and I was prepared only for a DSP interview and I was feeling pretty confident. However during the interview I was told that the Bangalore plant hires only VLSI Design engineers, so I decided to give it a go anyway but my lack of preparation led to my doom.
    Interview Tips
    I didn't use any online content, the curriculum covered by the EC dept. is sufficient.
    Round 2

    Other Interview

    Interview Experience
    Make the interviewer ask you questions based on your strengths. They only try to assess how well you can understand something you actually like.
    Skills

    Skills Tested

      Resources

      Preparation materials

      Books
      • The EC GATE book is very helpful to brush up your concepts.,
      General Tips
      The overall experience is a pain for people who have specific interests. Do not rely on information available on the placement website and wait for companies especially if placements are not your top priority.<br />
      My suggestion is to prepare well for the first few companies and get placed soon. You can sit off campus for companies you really like if all else fails.
      Read Full post...
      37

      Qualcomm SOFTWARE ENGINEER interview

      , 156 views
      AnonymousFresherSelected
      Application
      I was interviewed on-campus for SOFTWARE ENGINEER role at Qualcomm
      Interview Process
      Test Technical Interview HR Interview
      Round 1

      Test

      Duration
      70 Minutes
      No. of Questions
      55 questions
      Test Sections
      • Section 1: APTITUDE
      • Section 2: PROGRAMMING
      • Section 3: BASIC C++/OPERATING SYSTEMS
      Interview Experience
      There was an online written test of 55 multiple choice questions in 70 minutes. This included:
      20 questions of aptitude
      15 questions of programming
      25 questions of basic C++/operating systems
      Round 2

      Technical Interview

      Interview Experience
      My interview was a technical interview. It had questions from my core branch which was electronics. The other topics which were discussed in the interview were:
      OOPs concept
      Operating System
      Compiler
      Bit related questions
      There were also some other questions like puzzles and some pretty easy case studies which were based on logical reasoning and quantitative ability.
      Round 3

      HR Interview

      Interview Experience
      There was a HR interview in which they asked me about myself, my family, my strengths and weaknesses and also why was I suitable for the company. According to me if you could have impressed them with your technical skills you would have won half the battle.
      Skills

      Skills Tested

        Read Full post...
        38

        Qualcomm Associate engineer interview

        , 3.5k views
        AnonymousFresherSelected
        Application
        I was interviewed on-campus for Associate engineer role at Qualcomm
        Interview Process
        Test Technical Interview HR Interview
        Round 1

        Test

        Duration
        90 Minutes
        Interview Experience
        All questions had equal weightage and no negative marking. It was of MCQ pattern.
        Round 2

        Technical Interview

        Interview Experience
        3 technical rounds occoured. a) 45 minutes duration.b) First round was on general aptitude where they asked some puzzles.c) 2nd and 3rd were technical where they asked about projects mentioned in resume.
        Round 3

        HR Interview

        Interview Experience
        It was mostly to inform that I got the offer.
        Interview Tips
        Knowledge from the minor advance topics in VLSI is tested.
        Skills

        Skills Tested

          Skill Tips
          The questions were asked only based on projects highlighted in my resumeand questions were easy.
          Read Full post...
          39

          Qualcomm Associate engineer interview

          , 3.4k views
          AnonymousFresherSelected
          Application
          I was interviewed on-campus for Associate engineer role at Qualcomm
          Interview Process
          Test Technical Interview
          Round 1

          Test

          Duration
          120 Minutes
          Interview Experience
          Questions asked in the test from core
          Interview Tips
          Answer all the questions since there was no negative marking
          Round 2

          Technical Interview

          Interview Experience
          There was two technical interviews
          The subject knowledge and skills tested in technical round are:
          1.C programming
          2.Data structure and Algorithms
          3.Network basics
          Skills

          Skills Tested

          • C programming
          • Data structure
          • Network Basics
          • Algorithms
          Skill Tips
          Most important is C then Data structure and Algorithms then Little bit of Network Basics
          Read Full post...
          40

          Qualcomm Senior programmer analyst interview

          , 3.8k views
          AnonymousFresherSelected
          Application
          I was interviewed on-campus for Senior programmer analyst role at Qualcomm
          Interview Process
          Test
          Round 1

          Test

          Test Sections
          • Section 1: Quant
          • Section 2: C Language
          • Section 3: Questions related to EE
          Interview Experience
          I was targeting Qualcomm from the beginning and had done my preparation accordingly. It had a written test which consisted of three sections. Through the written test, they shortlisted only 14 people for the interview, which consisted of three rounds , 2 were technical and 3rd was HR interview. I had extensively prepared for the interview with the help of resources provided by the SPO and was able to clear it
          Skills

          Skills Tested

            General Tips
            1. According to me, one must be clear where does one actually want to go after graduation. <br />
            2. In my case I feel I was lucky enough to realize by the third year that my inclination was towards core sector and hence prepared accordingly. <br />
            3. I had kept CAT and Software profile companies as my back up option. <br />
            4. I believe that joining CL is a good idea especially if one is targeting Non-core firms as it helps in Quant and Aptitude preparation and giving CAT keeps the MBA option open as well. <br />
            5. Rest I feel that one can crack the interview of any company that one (realistically) targets, if one prepares well .
            Read Full post...
            SignUp/Login
            1-Step Login | Get unlimited access!
            This is the alert