L&T

Page 3 of 9 for L&T Interview Questions and Tips

Showing 21 - 30 of 84 interviews

21

L&T Get interview

, 30.7k views
Kanchan PandhareFresherSelected
Application
I was interviewed on-campus at Vidyalankar Institute of Technology Mumbai for Get role at L&T
Interview Process
Test Group Discussion Technical Interview HR Interview Paragraph writing
Round 1

Test

Duration
60 Minutes
No. of Questions
60 questions
Test Sections
  • Section 1: Quant & Basic Mathematics (20 Q).
  • Section 2: Logical Reasoning
  • Section 3: English
Interview Experience
Section 1 was quant. It was very simple. Practice basic questions
Logical reasoning and English sections were slightly tough than quantitative.Overall aptitude was simple and easy to pass
Interview Tips
Try to attempt all questions because there is no negative marking.
Round 2

Group Discussion

Duration
20-25mins Minutes
Group Discussion Topic
Is India a male dominant country?
Interview Experience
Spoke about the Haryana district with the live examples of two sisters Geeta Kumari and Babita Kumari, who won gold medals in wrestling.
Also mentioned about Saina Nehwal.
Basically I agreed that India is not a mail dominant country.
Interview Tips
Give examples as much as you can, examples portray how well you understand the topic. The examples should be about recent happenings
It also shows how much are you aware about the current scenario.
Stick to one side, if you are speak the first point for the topic, that is "India is a male dominant country" then don't go against this during the second point
No of times you speak, also matters.
Round 3

Technical Interview

Interview Questions
  • Question 1: Write a program to display prime numbers from 1-35
  • Question 2: Write a program to reverse a string
  • Question 3: What is polymorphism?
  • Question 4: Is method overloading possible in c++?
  • Question 5: One question on database to find the max mks from student table
  • Question 6: BE project, what softwares you will use?
  • Question 7: Can we write int func() and int func(int a) in a single class?
  • Question 8: How to insert a java code in <html> </html> (html tags) 9.
  • Question 9: Features of OOPS
  • Question 10: Any questions about the organization?
Interview Experience
I didn't answer 2 questions, it is fine if you don't answer the question rather than making the interviewer fool
Interview Tips
Prepare core subjects very well
Be prepared to answer the last question, it shows your interest in the company
Round 4

HR Interview

Interview Questions
  • Question 1: Previous companies attended by you
  • Question 2: Why didn't you clear the aptitude?
  • Question 3: What you learnt from this failure?
  • Question 4: Are you ready to relocate? (she asked me this question 3 times)
  • Question 5: About weakness which was mentioned in the form given by them
  • Question 6: Any question about the organization?
Interview Experience
It was my third company in campus. So the first question was surely expected, and I was prepared for that. If you clear the technical round then the ball is in your court. You can ace the HR round.
Interview Tips
Just be yourself. Be prepared with basic  HR questions.
Round 5

Paragraph writing

Interview Experience
Topic - Effect of public holidays on Indian economy
Interview Tips
Write atmost one page.3/4th page is also fine.
Skills

Skills Tested

  • Programming
  • Communication Skills
  • Database Skills
Resources

Preparation materials

Books
  • RS Agarwal,
Read Full post...
22

L&T Pget interview

, 10.9k views
AnonymousFresherSelected
Application
I was interviewed on-campus for Pget role at L&T
Interview Process
Technical Interview Case Study Interview Guesstimate Interview Other Interview HR Interview
Round 1

Technical Interview

Interview Questions
  • Question 1: Bending moment diagram of a given framed structure ?
  • Question 2: Bending Moment diagram of an indeterminate beam. And, how to find the moments at the mid span of the beam ?
  • Question 3: Describe the basic moment distribution method to solve indeterminate systems ?
  • Question 4: Basic assumptions in Concrete Limit Design state and the method to design a beam ?
  • Question 5: Working Stress Design Method for Steel Structures ?
  • Question 6: How to design a building taking into account the earthquake loads and what are the parameters used during the procedure ?
  • Question 7: Draw a Bending Moment Diagram in a given loading case?
Round 2

Case Study Interview

Interview Questions
  • Question 1: How will you construct a green building in Rajasthan? Give a basic outline of the steps involved?
Interview Experience
One point which the panel liked was the use of Solar energy and rain harvesting for the power.
Round 3

Guesstimate Interview

Interview Questions
  • Question 1: Given a force in the frame structure, find the basic deflection.
  • Question 2: How many beams in the room are there?
Round 4

Other Interview

Interview Questions
  • Question 1: Basic tests in geotechnical engineering e.g. Plate Load Test, DCPT, CPT, SPT and Terzaghi equations.
  • Question 2: Some questions on the intern.
  • Question 3: What are your area of interest and asked questions in the same topic?
Interview Experience
The basic types of tests in geo-technical engineering were asked and then some follow up questions.
Round 5

HR Interview

Interview Questions
  • Question 1: What was the thought process during the conduction of Nucleus and the main glitches during the interview? How could you have overcome those?
  • Question 2: What are your hobbies?
  • Question 3: What was the toughest situation in your life and how did you tackle it?
Interview Experience
Basic questions on my hobby like: . the normal heart beat for an athlete, pulse rate etc were also asked. And, it mostly revolved around the resume.
Skills

Skills Tested

  • Concrete Analysis
  • Structural Analysis
Skill Tips
The above two topics are very important.
Resources

Preparation materials

Books
  • Ranjan and Rao,
General Tips
1. Specific marks allotted to the posture and attentiveness in the interview. <br />
2. It would be better if you talk to the interviewer in the eye. <br />
3. Reading speed is very important and helps a lot if you have one in the Test 2.
Read Full post...
23

L&T Management trainee interview

, 10.2k views
AnonymousFresherSelected
Application
I was interviewed on-campus for Management trainee role at L&T
Interview Process
Test Technical Interview Form filling HR Interview
Round 1

Test

Duration
60+30 Minutes
No. of Questions
100+45 questions
Test Sections
  • Section 1: Aptitude Test-1
  • Section 2: Aptitude Test-2
Interview Experience
1. Easy level CAT preps. Questions on basic math, Prob. & Stats, Speed
2. Totally English based test, 15 paragraphs 8-10 liners, 3 ques on each, direct and easy ques, answers
available in the paragraphs itself, no deep thinking required, only good Speed required.
Interview Tips
1. Dist. Time questions, only Speed is imp. Shortlisted 40 of 120 (both BTech and MTech)
2. Shortlisted 15-18 of 40
Round 2

Technical Interview

Interview Questions
  • Question 1: Project, internship, BTP-based questions
  • Question 2: Basic coursework - department based
Interview Experience
No question on extra knowledge, have clear understanding of things related to your resume
Eg. What is your favorite subject and then questions on that subject.
Eg. Your BTP seems to be quite interesting, please elaborate on it
Round 3

Form filling

Interview Experience
A form was filled in the interview which consisted of: Personal details, projects, interns, BTP, qualities,
extracurricular activities. Questions were based mostly on this form and some general questions like:
• About Yourself
• Knowledge on finance
• Tell about 3 topics of current affairs
No resume related questions.
Some basic questions were asked:
• What is welding (asked to all candidates)
• Questions on mechanical properties of materials like: What is hardness and tests to measure hardness
Round 4

HR Interview

Interview Questions
  • Question 1: Why you want to join company?
  • Question 2: How you would be helpful?
  • Question 3: Tell something creative that you have done, something which you think that very few people have done
  • Question 4: Why did you choose MME dept. and why did you choose IITK?
  • Question 5: Strengths and weaknesses ?
  • Question 6: What do you think about our selection procedure?
Interview Experience
30 minutes duration.
Skills

Skills Tested

    General Tips
    1. Courses in particular are not required but, should have clear understanding of your project, interns and BTP and general concepts of each coursework. <br />
    2. For MME Dept.: You really need to prepare very hard as there are very few companies for our <br />
    Dept. Prepare well for your BTP and projects. In the HR interview try to justify each and every point you <br />
    speak from your day to day examples.
    Read Full post...
    24

    L&T Get interview

    , 9.6k views
    SPANDAN KUNDUFresherSelected
    Application
    I was interviewed on-campus at NIT Durgapur for Get role at L&T
    Interview Process
    Test Technical Interview
    Round 1

    Test

    Duration
    60 Minutes
    No. of Questions
    70 questions
    Test Sections
    • Section 1: Aptitude
    • Section 2: English
    Interview Experience
    The aptitude section consisted of 20 questions to be done in 40 minutes and the english section had 50 questions to be done in 20 minutes. The apti was quite okay-ish and could be completed with full concentration and english was damn easy...probably thats why they gave so many questions.
    Interview Tips
    Just keep calm and continue solving questions at a steady pace and focus on doing more of english questions right.
    Round 2

    Technical Interview

    Interview Experience
    We had only one interview where the only HR question was "Tell me about yourself". Well its really true that no one else can prepare an answer to this, except you. The others were basic mech questions from the subject which is your favorite( He asked me that in the beginning), in my case, Thermodynamics.
    Interview Tips
    I'm gonna give you the same advice that anyone would give for facing an interview, i.e., BE YOURSELF! But yeah, I know its not so easy to be so, in front of the person who would actually give you your first job! I would say, just be confident....that will prevent you from trying to be some other better person thinking the interviewer would like you. Though it will sound a little illogical but I would like to think that believing "there's nothing to lose before an interview" will give you exactly the self confidence you'll need to go out there and give it your best shot no matter what. Oh, and last but not the least don't ever lie in front of him...be honest with yourself as well as the interviewer. Like, I have an Ankan Ratna in painting (though I don't like painting that much...it was kind of forced by my mum :P ), when he read that in my CV he was amused, but I immediately confessed that I had left painting way back in class 10 and had not touched a brush since. Cause if he had asked me to paint anything at that moment, I surely wouldn't have done justice to the word, "painting"! :P
    Skills

    Skills Tested

    • Patience
    • Aptitude
    • English proficiency
    • Technical knowledge
    Skill Tips
    I had to wait outside the interview room from morning till 5 pm in the evening. So have patience.
    Read Full post...
    25

    L&T Senior engineer interview

    , 9.8k views
    Shveta GuptaExperiencedSelected
    Application
    I Applied for job through PLACEMENT for Senior engineer role at L&T
    Interview Process
    Technical Interview
    Round 1

    Technical Interview

    Interview Experience
    Good detailed interview in terms of technical knowledge
    Interview Tips
    Should be thorough with the projects you have done during the course
    Skills

    Skills Tested

    • Communication
    • Thinking capability
    • knowledge applying capability
    Resources

    Preparation materials

    Books
    • RS Aggarwal for Aptitude,
    General Tips
    be confident of what you put in your resume<br />
    Technical knowledge regarding projects undertaken during engineering should be sound <br />
    Be confident
    Motivation for applying
    Opportunity to work in a renowned and core technical company
    Funny Moments
    We consider the interview panelists to be as tough as our viva externals. Interviewers are mostly on your side(contrary to viva professors :P)
    Read Full post...
    26

    L&T Management trainee interview

    , 7.1k views
    B VigneswaranFresherSelected
    Application
    I was interviewed on-campus at IIT Madras for Management trainee role at L&T
    Interview Process
    Test Technical Interview HR Interview
    Round 1

    Test

    Duration
    55 minutes Minutes
    No. of Questions
    60 questions
    Test Sections
    • Section 1: aptitude,logical reasoning and verbal
    • Section 2: management
    Interview Tips
    Clearing 1st test, you will be considered for PGET and on clearing both tests, you will be considered for PGMT.
    Round 2

    Technical Interview

    Interview Questions
    • Question 1: asked about welding, in detail about stainless steel welding
    Round 3

    HR Interview

    Interview Questions
    • Question 1: whether you are flexible or not to get posted anywhere in India/
    Skills

    Skills Tested

      General Tips
      started preparaing a month before, brushing technical concepts,aptitude for speed.1st year(M tech)- if you prefer core companies, gofor some process related courses(it would help in interviews). Those with mechanical background, they have an upper hand, CG is important, 8+ is safe, 9+is very good.<br />
      <br />
      2nd years- project is important
      Read Full post...
      27

      L&T Get interview

      , 8.1k views
      ARTHAM ABHISHEK SAIFresherSelected
      Application
      I was interviewed on-campus at NIT Warangal for Get role at L&T
      Interview Process
      Test Technical Interview HR Interview
      Round 1

      Test

      Duration
      60 Minutes
      Test Sections
      • Section 1: Aptitude Test
      • Section 2: Quantitative
      • Section 3: Reasoning / Analytical
      • Section 4: Verbal English
      Interview Experience
      Usage of articles, General English, Synonyms, Antonyms, Passage reading. reasoning, simple maths , situational analysis were part of the test paper.
      Round 2

      Technical Interview

      Interview Experience
      In the technical interview the basic knowledge in civil engineering was checked and Bending moment and shear force
      diagrams for a basic structure were asked and A Slab for a sump is to be laid of size 3m X 2m, for which there are two alternatives of laying slabs i.e two slabs of 1m X 3m each and three Slabs of 1m X 2m each and the best alternative was to lay three slabs of 1m X 3m so that the depth of slab can be reduced. Why the cross section of a chimney is increased from top to bottom. Typical reinforcement detailing for Structural Members and normal percentage of reinforcement adopted for different types of structures, Analysis of structures.The details about the project work that u have done in your Btech,Dip.
      Round 3

      HR Interview

      Interview Experience
      In the Personal Interview the details about the family background were asked .
      Skills

      Skills Tested

        Skill Tips
        Your Basic knowledge in subject and the communicating abilities are the most important things that were checked and the answering style was also checked whether what you are answering is answered confidently or not. and whether u are able to choose a best alternative if some of the alternatives are given. Be perfect in basics and be touch with all the subjects that u have studied irrespective of the subject that you are the most interested in. CGPA is not of a big matter if u have the subject in you and perform well in the interview but it is better to have good CGPA.
        Read Full post...
        28

        L&T Site job interview

        , 7k views
        AnonymousFresherSelected
        Application
        I was interviewed on-campus for Site job role at L&T
        Interview Process
        Test HR Interview
        Round 1

        Test

        Interview Experience
        consists of mostly technical questions and a few verbal & analytical ability Qs. this test is easy and generally everyone cracks it.
        Round 2

        HR Interview

        Interview Questions
        • Question 1: tell me abt urself?
        • Question 2: Can a concrete member take tension?
        • Question 3: what is tension capacity of concrete?...etc
        Interview Experience
        it starts with giving personal introduction and then a few basic technical questions related to concrete, its properties. engineering materials, tests performed on materials...prepare a nice personal introduction telling about ur school. college, family, hobbies, likes, dislikes etc...and most importantly be honest..
        Interview Tips
        no hints as such...
        only thing is they wud constantly bombard u with Qs like
        are u ready to do site work?
        We have a major project going on in (some place), wud u like to work on it?
        ....u must be willing to go anywhere in india!!!
        actually, i didnt join L&T....
        But, if u r willing to travel anywhere and ready to work from 8 to 8, then L&T is a good company where u wud get a load of experience.
        Best of Luck
        Skills

        Skills Tested

          Read Full post...
          29

          L&T Management, technical interview

          , 6.5k views
          AnonymousFresherSelected
          Application
          I was interviewed on-campus for Management, technical role at L&T
          Interview Process
          Technical Interview
          Round 1

          Technical Interview

          Interview Questions
          • Question 1: What is the most basic machine for an Electrical Engineer?
          • Question 2: Explain working of induction motor?
          • Question 3: Explain DC series and DC shunt motor?
          • Question 4: Synchronous speed of a 4 pole synchronous machine?
          • Question 5: Why transmission at high voltage is preferred than at low voltage?
          General Tips
          Just be yourselves, be honest and be confident and hope for the best.<br />
          Aal Izz Well.....<br />
          <br />
          Ya, do not study, read or discuss like a geek before the interview and do not think how others have given their interview. It can spoil your mood or can upset you. Do not treat your interview as your college viva or some Grand Slam tournament. You can win but you will never lose because you will surely learn something. REMEMBER THAT EVERY INTERVIEW YOU APPEAR, YOU WILL REDISCOVER YOURSELVES. SO ALWAYS BE HAPPY AND BE READY FOR IT.....
          Read Full post...
          30

          L&T Get ( graduate engineer trainee ) interview

          , 6.3k views
          Rejin JoyFresherSelected
          Application
          I was interviewed on-campus at NIT Surathkal for Get ( graduate engineer trainee ) role at L&T
          Interview Process
          Test Technical Interview HR Interview
          Round 1

          Test

          Test Sections
          • Section 1: ONLINE TEST
          Interview Experience
          Basic Quant and Logical Reasoning and a Verbal Section.
          Round 2

          Technical Interview

          Round 3

          HR Interview

          Skills

          Skills Tested

          Skill Tips
          Steer the interview into a topic that you are comfortable with. Rest of the questions will be based on that topic. Online Test was just as most other companies. Interview could be grueling but the interviewer is friendly and makes you feel at ease.
          General Tips
          Focus on basic Electrical questions, nothing too in depth Graduate Engineer Trainee.<br />
          Ask him about location where you will be posted at and if it would be an on-site job or off-site job.
          Read Full post...
          SignUp/Login
          1-Step Login | Get unlimited access!
          This is the alert