L&T

L&T Interview Questions and Tips

Showing 1 - 10 of 80 interviews

1

L&T Get interview

32.9k views
Harsh VardhanFresherSelected
Application
I was interviewed on-campus at MIT Manipal for Get role at L&T
Interview Process
Test Technical Interview HR Interview
Round 1

Test

Duration
60 Minutes
No. of Questions
60 questions
Test Sections
  • Section 1: Aptitude Test
  • Section 2: English Test
Interview Experience
Aptitude test consists of a mix of all kinds of basis aptitude questions. English test consists of 57 questions containing a healthy mix of short comprehension, sentence formation, error in tenses, antonyms , synonyms etc to be answered in 20 min.
Interview Tips
For aptitude practice R S Aggarwal thoroughly. since in aptitude you have to answer 1 question every min so speed and precision is the key and that requires a lot of practice.  Wile practicing aptitude questions it is always helpful if you take help of a stop watch so that you can have a track of time you are consuming in solving a particular type of question and hence you can optimize on that for eg: you may require less time in solving questions related to a some topic and more time on other. Thus you will have an idea as to questions from which topic is to be attempted first and which has to be left for last. Your target should be to have more than 35 questions correct at all cost then you have a good chance of getting selected.
For English i feel a regular reading of newspaper, novels and magazines is enough provided you are regular in that.
Round 2

Technical Interview

Interview Questions
  • Question 1: What do u mean by M20?
  • Question 2: What is the nominal mix of M20?
  • Question 3: How do u measure the workability of concrete?
  • Question 4: Explain briefly the procedure for the above methods.?
  • Question 5: Which method would you use in site? What are its demerits?
  • Question 6: Tell me something about placing of concrete?
  • Question 7: Have you heard about slip form technique?
  • Question 8: What is chuting of concrete?
  • Question 9: As an engineer when will you go for chuting and is it a good method of concrete pouring?
  • Question 10: What are the factores affecting the strength of concrete?
  • Question 11: Have you heard about Boars compounds?
  • Question 12: Name the compounds and state their importance.
  • Question 13: How many different types of slabs are there? Explain each.
  • Question 14: What is the difference between 1way slab and 2 way slab?
  • Question 15: Identify which type of slab is above our heads?
  • Question 16: When to use 1 way and 2 way slab?
  • Question 17: In slab above our head where is the shear force and bending moment maximum?
  • Question 18: Where is the reinforcement provided for shear and bending ?
Interview Experience
Really grilling interview considering the no of questions asked but at the same time  it was a good experience. They ask question from your area of interest eg; Building science , Structural design and analysis, Geotec, water resources and transportation.
Interview Tips
You should be very good in atleast 3 of the above subjects. Read some technical journals as well helps if you quote some research related to the topic.Give a good brief but complete answer and if u don't know say that.If you are unable to remember answer for a particular question you can ask for some time to think n that will be givenThe interviewer will at times add a practical angle to a question n if you hit a six here you have good chance of  success. Remember you have to be well prepared to answer these question so be well prepared. With Lord Sai's grace may u succeed.
Round 3

HR Interview

Interview Questions
  • Question 1: Tell me something abt yourself.
  • Question 2: Why did you select civil?
  • Question 3: In our organization which department would you like to work in?
  • Question 4: Why are you interested in these subjects( your area of interest)..?
  • Question 5: Do you have any higher educations plans? If
  • Question 6: Where do u see yourself after 5 years?
  • Question 7: You know civil engg..buildis structures of social importance ....lots of social impact ..so whats your social footprint?
  • Question 8: Other than your CV ..what kind of person you are ? What has been your biggest achievements?
  • Question 9: Do you play any sports ?
Interview Tips
1) Communication skills2) Technical knowledge3) Value match and organizational fit.4) Ability to apply technical knowledge to real life problems.These are the 4 pillars on which your entire interview process stands. Keep these things in mind when u give an answer.And you have lot of material available online for Hr interview go through that.
Resources

Preparation materials

Books
  • Concrete Technology by M S Shetty,
  • Structural Design by HJ shah...N krishna raju.....bhavikatti,
  • structural analysis by C S reddy ,
  • Bhavikatti,
  • Soil Mechanics by B C Punmia,
  • General aptitude by R S aggarwal,
  • Transportation engineering by khanna and justo,
  • THE HINDU Newspaper every day,
General Tips
Already given .
Motivation for applying
Larsen & Toubro is a major technology, engineering, construction, manufacturing and financial services conglomerate, with global operations. L&T addresses critical needs in key sectors - Hydrocarbon, Infrastructure, Power, Process Industries and Defense - for customers in over 30 countries around the world.L&T is engaged in core, high impact sectors of the economy and our integrated capabilities span the entire spectrum of ‘design to deliver’.Every aspect of L&T's businesses is characterised by professionalism and high standards of corporate governance. The Company’s manufacturing footprint extends across eight countries in addition to India. L&T has several international offices and a supply chain that extends around the globe.
Read Full post...
2

L&T Get ( graduate engineer trainee ) interview

22.6k views
Vikrant MishraFresherSelected
Application
I was interviewed on-campus at NIT Rourkela for Get ( graduate engineer trainee ) role at L&T
Interview Process
Resume Shortlist Test Technical Interview HR Interview
Round 1

Resume Shortlist

Interview Experience
it was shortlisting on the resume. they just shortlisted top 40 student from civil on the c.g criteria in this round.
Interview Tips
if u have good c.g nothing to worry.
Round 2

Test

Duration
80 Minutes
No. of Questions
110 questions
Test Sections
  • Section 1: aptitude test
  • Section 2: general english test
Interview Experience
the questions from aptitude section was average. it contained questions from probability, data interpretation, percentage and on basic mathematics. the English test was good. sentence correction, sentence reordering , summary was there.
Interview Tips
there was 60 questions in 60 minutes on aptitude. so time was a great factor. so time management should be a helpful key.
there was 50 questions of English in 20 minutes. it requires great speed.
attempt every section because , there is a certain cut off from each section.
Round 3

Technical Interview

Interview Questions
  • Question 1: what is your area of interest?
  • Question 2: which ic you want to join in l&t?
  • Question 3: what is the procedure for form work removal on site?
  • Question 4: what is difference between nominal & design mix?
  • Question 5: what are the main admixtures used in concrete?
  • Question 6: what will you do if transit mixer getting delay in reaching site before the i.s.t. of cement?
  • Question 7: difference between one way and two way slab?
  • Question 8: what is the green building?
  • Question 9: why it is required to design the mix on site?
  • Question 10: what are the common tests performed on concrete and cement?
  • Question 11: how will u measure the workability of concrete on site?
Interview Experience
i told my area of interest- concrete & rcc. so all questions was based on these subjects. the questions were very easy . the interviewer was very cool.
Interview Tips
confidence is the major key. don't hesitate, speak clearly and confidently. they want to see your confidence, if u don't know any answer clearly tell about it.
show them the interest of core knowledge.
Round 4

HR Interview

Interview Questions
  • Question 1: tell about yourself.
  • Question 2: what was your rank in jee mains?
  • Question 3: why you chose civil engineering?
  • Question 4: why do u want to join l&t?
  • Question 5: in which ic u want to work?
  • Question 6: what will you do if u will not get ur favorite ic?
  • Question 7: tell about ur family.
  • Question 8: what extra curricular activities u do in college?
  • Question 9: share some experience of your life in this college?
  • Question 10: tell about your qualities.
  • Question 11: why you want to join construction company?
  • Question 12: what do u know about the company?
  • Question 13: why we should hire you?
Interview Experience
the hr questions was as expected. he wanted to know about personality. what made me to join l&t? i answered all the question with ease and confidence.
Interview Tips
confidence is the key of success. show yourself as you are made for this company, u really want to join this company . do not tell anything wrong about yourself?
Resources

Preparation materials

Books
  • RCC By Devdas Menon,
  • BC Punmia RCC Design,
  • Concrete Technology By M S Shetty,
Videos
  • youtube videos,
General Tips
be confident , attentive throughout the process. dont let the interviewer dominate over you. if u do not any answer , tell clearly that u dont know this. show dedication to join the company
Motivation for applying
it is the leading construction company in India.

it is very good company for freshers.

career growth for GET is very good.

working experience of this company is very good.

Read Full post...
3

L&T Get ( graduate engineer trainee ) interview

30.6k views
Mayank KhatriExperiencedSelected
Application
I Applied for job through Campus Recruitment for Get ( graduate engineer trainee ) role at L&T
Interview Process
Test Group Discussion Technical Interview
Round 1

Test

Duration
90 Minutes
No. of Questions
120 questions
Test Sections
  • Section 1: Technical Section
  • Section 2: Aptitude Section
Interview Experience
In the technical section there were 45 questions for which 30 mins were given. There were 3 subsections in Aptitude section: Analytical reasoning, Quantitative Aptitude and Verbal Ability. 25 questions in each subsection for which a total of 60 mins was given. Basic questions but conceptual in the technical section. There was separate cut off for each section as well as an overall cutoff.
Interview Tips
Manage your time accordingly. For the technical round (mechanical students) prepare machine design, strength of materials, manufacturing technology properly.
Round 2

Group Discussion

Duration
30 Minutes
Group Discussion Topic
India: A land of talent but devoid of innovation
Interview Experience
It was not an elimination round. So, I was relaxed a bit. The topic was something we all think about but rarely discuss with friends. It went good for me. I spoke whenever I got a chance to and I feel the most important thing was being to the point and that our group had a proper discussion coming to a proper conclusion.
Interview Tips
Stick to the basic rules of a group discussion. Do not panic in any condition. Do not speak a lot. Give others also a chance to speak. And most importantly do speak. Even if you are not confident at the start, try speaking and you will eventually gain confidence. And do not think if you are not good at English and all. Keeping your point of view is what you should focus on.
Round 3

Technical Interview

Interview Questions
  • Question 1: Tell us about yourself
  • Question 2: Some questions on the final year project
  • Question 3: Questions on favourite subjects. Mine are fluid machines and heat transfer. Types,Principles and Applications of Pumps, turbines, heat exchangers etc.
  • Question 4: Questions on industrial training
  • Question 5: Do you want to go for further studies? With reason.
  • Question 6: What is your choice for the functional area?
  • Question 7: What extra curricular activities have you been a part of and didnt they affect your studies?
  • Question 8: Some other technical questions on manufacturing technology like the types of welding and difference between submerged arc welding and metal inert gas welding
  • Question 9: Difference between pipes and tubes
  • Question 10: Types of tubes and which of them is used in a heat exchanger
Interview Experience
It was quite good. I felt I did well in my interview. They were correcting me as well whenever I was wrong. Gave advices for life and the industry. I felt quite comfortable communicating with them as well.
Interview Tips
Prepare atleast 2 favourite subjects thoroughly. Prepare the basic HR questions. Have good knowledge of your final year project and the training/internship. Again do not panic if u don't know the answers to some questions. You need not know the answer to each and every question. Be honest and be yourself. Do not try to fake. Do carry a smile throughout and if you are lucky enough you might get selected ;)
Resources

Preparation materials

Books
  • Fluid machines by jagdish lal,
  • Heat and mass transfer by m.m,
  • rathore,
General Tips
Even if you do not get selected stay composed. A lot of companies come for recruitment and you just need a good day to get selected. It might have been one of those bad days at the office.
Motivation for applying
It is the biggest engineering company in India (no.1). It gives me the site job that I actually wanted. I wanted to go production side and it gives me a chance to do that. Moreover during my training I would get to explore a number of other moments as well.
Funny Moments
When they asked me if I would go for further studies I simply said no and to the reason I said that I don't have an answer to this why to which they started laughing. Also, during the interview they cracked a few jokes which I didn't understand but I simply laughed along with them :P

Read Full post...
4

L&T Management trainee interview

31.3k views
BHAVESH SHRIMALIFresherSelected
Application
I was interviewed on-campus at IIT Guwahati for Management trainee role at L&T
Interview Process
Test Interview Interview
Round 1

Test

Duration
120 minutes Minutes
Test Sections
  • Section 1: General Aptitude
  • Section 2: Reading Section-Comprehension passages
Interview Experience
Fairly easy, those preparing for CAT would ace the first section pretty easily. For the second section, you'd require an ample experience of reading standard comprehension passages. Online reading resources such as the Op-Eds on TIME, The Hindu, NYT would help big time.
Interview Tips
Be composed and conscious of the time. This test is all about pacing ahead of time and hence a hands on practice on all the relevant sections would really help. There are a good amount of resources for both the sections on the web. So be calm and prepare good.
Round 2

Interview

Interview Questions
  • Question 1: High Strength Concrete with special reference to Fibre Reinforced Concrete- Small Technicalities such as the strength, ductility etc.
Interview Experience
It was based on what I had mentioned on the pre-interview proforma, which, they usually ask every candidate to fill. A couple of bullets from my resume provided them enough material to frame their questions. Since L&T ECC heavily deals in concreting operations throughout its projects, having studied FRC greatly helped my case. The experience during my internship also helped me to elaborate my experience. They asked some basic questions pertinent to the grade of the concrete, cement employed and the ductility achieved and some general questions such as what are its advantages over normal concrete and how would it help me in contributing positively to their company.
Interview Tips
Nothing much! Just prepare your resume bullet points in and out. Do not add anything new on the proforma. You never know that it might just go against what you say in the interview. People usually flounder in interview because they try to condense a lot of information in a short span of time. Instead just try to be concise and explicit in you writing so that you can elaborate your experience exactly the way you may want to elaborate in the interview. Strictly adhere to the lines mentioned in the proforma.
Round 3

Interview

Interview Questions
  • Question 1: Basic Details and how'd I be an asset to the company
Interview Experience
Standard replies did good for me. Just try to mention all the positives in your resume. This is where you will be, more often than not, given opportunity to elaborate on your extracurricular activities and responsibilities. L&T especially with their MT profilers would always want a diversified group who can carry out both Management and Engineering with ease.
Interview Tips
Nothing much. If you survived till here you are highly likely to get through this as well. All the best!
Skills

Skills Tested

Skill Tips
Just be prepared with all the tests that you performed in your Concrete/Materials Laboratory. Concrete Mixers, Bleeding prevention mechanisms etc.
Resources

Preparation materials

Books
  • Any standard book on Concrete Tech,
General Tips
Stay Calm. You may not get through companies which your counterparts in Computer Science or other branches would. But if you keep fretting over your past you'd probably ruin your present and it will drastically affect your future. Don't judge yourself by the package you get in the starting. Companies like L&T usually ground their freshies but the longer you stay the more you are of value to the Company. Ask anyone who's been around in the ECC for more than 10 years and they'd tell you the rest. Stay used to of being awake till the wee hours of the morning (for placements at least) as I was not. It did hamper my chances on the first night of the placement. (which is an entirely different experience to share) :P
Motivation for applying
L&T ECC is known as one of the most gritty companies and provides an avenue for being a party to challenging projects. The work, its type, and its impact is what drove me personally to apply to it.
Funny Moments
I don't know if it sounds funny, but after sitting in a big shot finance company on day zero at 1 am in the night, and finally succumbing in round 3, it was almost a draught of 7 days before this opportunity came. And interestingly I had not applied for any other company. So, in the hindsight, I actually find myself lucky enough to have got through. Had this gone then.... :D
Read Full post...
5

L&T Get interview

29.6k views
Neema SharmaFresherSelected
Application
I was interviewed on-campus at NIT Bhopal for Get role at L&T
Interview Process
Test Technical Interview HR Interview
Round 1

Test

Duration
75 Minutes
No. of Questions
100 questions
Test Sections
  • Section 1: aptitude
  • Section 2: english proficiency
Interview Experience
In both the sections there was no negative marking.
section 1 aptitude consisted of 50 questions to be solved in 60 minutes which included questions from reading comprehension passages, quantitative ability and analytical ability.
section 2 english proficiency consisted of 50 questions to be solved in 15 minutes and included mainly grammar and vocabulary based questions. 
Questions were not tough and test went pretty well and I was confident enough to get through the written test.
Interview Tips
Just manage the time well and make sure to answer every question since there is no negative marking. Focus on the grammatical errors and editing in section 2 because the options are quite confusing and time is less.
Round 2

Technical Interview

Interview Questions
  • Question 1: what is quick sand condition and how will you rectify it?
  • Question 2: In RCC how can you determine practically the under and over reinformed sections?
  • Question 3: what's the sequence of removing form work in site and explain it logically?
  • Question 4: shear force and bending moment diagrams of the beams given by the interviewer.
  • Question 5: what is honey combing and how to rectify it on site?
  • Question 6: questions related to your minor project and major trainings.
  • Question 7: various codes and their relevance
  • Question 8: applications of matrix method and MDM.
  • Question 9: define curb resistances and give practical methods of providing vertical alignment on highways?
  • Question 10: questions related to tests on road aggregates and bitumen.
Interview Experience
Technical round went quite well since they ask you the questions related to your strengths in various subjects. It went on for about 30 mins.Interviewer seemed contented with the answers. They asked if I had interest in subjects like hydrology and irrigation and my simple 'no' reply impressed them because they expect genuine answers and personality.
Interview Tips
Just start from the basics and get to the answers eventually & aptly and answer confidently. Don't hesitate to ask proper queries wherever possible. Show your strengths in subjects like structure, RCC, soil mechanics, steel,fluid mechanics because these subjects are relevant to their firm. However , basics of surveying and irrigation will also work. Apply practical approach. Show your willingness to learn new things after joining their firm.
Round 3

HR Interview

Interview Questions
  • Question 1: why do you want to join L&T?
  • Question 2: what are your hobbies?
  • Question 3: If an office of 100 people is given to you under your leadership ,will you handle it efficiently and how?
  • Question 4: why aren't you going for further studies?
Interview Experience
Technical interview is the deciding interview. You will be passed onto the HR interview if and only if they are sure enough to hire you. Hr interview went on for 10-15 mins. They just wanted to know my personality traits.
Interview Tips
Just answer every question calmly. Avoid showing desperation to join the firm and and the excitement or over confidence that you are already hired. Don't fake anything about yourself and be natural because they easily judge what quality comes out from you at the best.
Resources

Preparation materials

Books
  • Books of civil engineering subjects,
General Tips
Prepare the subjects of your choice well because those will determine your fluency and confidence while answering questions.
Motivation for applying
The fact that L&T is the largest private construction firm in India served as the motivation.
Funny Moments
HR interviewer, after completion of whole procedure ,told that he had given the interview for his promotion a day before he came to MANIT and the result was due during the timing of my interview. So I calmly replied " Don't worry sir, you must have definitely cracked the interview..just chill and could you just give your promotion party in advance now coz I am starving"...:D
Read Full post...
6

L&T Get ( graduate engineer trainee ) interview

25.6k views
Rakesh RavulaFresherSelected
Application
I was interviewed on-campus at IIT Bhubaneshwar for Get ( graduate engineer trainee ) role at L&T
Interview Process
Test Technical Interview HR Interview
Round 1

Test

Duration
80 Minutes
No. of Questions
111 questions
Test Sections
  • Section 1: MCQ with English
Interview Experience
Questions were not that difficult but time management was more important in that . I have seen a lot of my friends who forgot or started attempting English at the end and eventually didn't got selected due to section cut-off and Overall cut off
Interview Tips
Yes, time management is pretty important in Test. Questions will also be in normal level. In English most of the questions are like correct the sentences and paragraphs with questions asked related to paragraph. Just you can practice it from any aptitude app.
Surely, prepare well for aptitude
Round 2

Technical Interview

Interview Questions
  • Question 1: Tell me about yourself?
  • Question 2: B Tech project and related few questions
  • Question 3: Interest areas and basic questions like how slump is measured and what is the amount of normal slump etc.
Interview Experience
Overall it was a nice experience. But the interview was mostly HR comparative to Technical.Just say if you know the answers and don't get tensed because they won't ask high level questions.Be confident wait for sometime and frame your answer and say it. Don't blabber the answer immediately it will create the bad impression.
Interview Tips
If you can crack aptitude then in interview you can get yourself placed just by preparing yourself by what kind of basic questions they are going to ask. So ALL THE BEST. Give your best in your interview.
Round 3

HR Interview

Interview Questions
  • Question 1: How many friends you have?
  • Question 2: why you want to join l & t ?
  • Question 3: Extra circular Things that you did in college?
  • Question 4: why we need you to take you?
  • Question 5: Is it fine if you are placed in any part of india
  • Question 6: What kind of food you eat mostly? is it ok if you are placed in some other state etc
  • Question 7: if you want to study any higher studies like MTech?
Interview Experience
Overall the interview was good. most of the questions should be answered on spot so use your skills in presenting the answers.
Interview Tips
Just stay positive. Results will follow you.
Resources

Preparation materials

Books
  • Any Aptitude And Reasoning Book,
General Tips
Just clear the aptitude interview will be easy. Selection of civil engineers are very high compared to other engineering people.
Motivation for applying
Core company in civil engineering with lot of diversity
Read Full post...
7

L&T Get ( graduate engineer trainee ) interview

29.3k views
Pratik GoyalFresherSelected
Application
I was interviewed on-campus at VIT Vellore for Get ( graduate engineer trainee ) role at L&T
Interview Process
Resume Shortlist Test Technical Interview HR Interview
Round 1

Resume Shortlist

Interview Experience
L&T (Larsen and Toubro) Constructions gives chance to only top rank holders in every college.Their criteria varies according to their need.In my time the eligibility criteria was -Top 40 rank holders with 10th and 12th- 60%
Interview Tips
Start maintaining your rank from the first year of college itself.
Round 2

Test

Duration
60 Minutes
No. of Questions
60 questions
Test Sections
  • Section 1: Aptitude Test
  • Section 2: English Test
Interview Experience
The level of both the tests was good. Do some practice for Aptitude and Logical Reasoning questions before.



English test was completely based on Grammar. The duration of English test was just 20 minutes for 51 questions.Questions were easy only but without practice not possible.
Interview Tips
For practicing questions of any section, you can practice at www.Indiabix.com. The selection cutoff for these tests was around 60%.
Round 3

Technical Interview

Interview Questions
  • Question 1: Difference between Nominal mix of concrete and Design mix of concrete ?
  • Question 2: Grades of concrete and Grades of Cement
  • Question 3: How do you define Compressive strength of concrete and what is the meaning of M25 concrete
  • Question 4: Types of Cover in Reinforced concrete and explain them
  • Question 5: What is singly and Doubly Reinforced beam
  • Question 6: Types of Retaining wall and difference between them
  • Question 7: What is Green Buildings and materials to make green building
  • Question 8: What is parapet waall
  • Question 9: How much thickness of plaster we provide for inner and outer wall
  • Question 10: What is damp proof course and why we use it ?
  • Question 11: What is the N value of rocks
  • Question 12: some basic of soil mechanics and Foundation Engineering
Interview Experience
The interview was started with some basic HR questions, then they asked me about my projects. After projects they started asking questions from every possible subject of civil engineering.
Interview Tips
According to me if u want to get a job in this company, you must be technically good. Be confident and calm in the interview and if you don't know any answer just tell them sir i don't know this.
Round 4

HR Interview

Interview Questions
  • Question 1: Tell me about yourself ?
  • Question 2: What does your father do ?
  • Question 3: Are you ready for SITE job ?
  • Question 4: Any idea about work culture of L&T ?
Interview Experience
The HR interview was a normal interview. They just waned to check i am interested or not.
Interview Tips
Do some research about Company before going to interview.
Resources

Preparation materials

Books
  • M.s.sheety for Concrete Technology,
  • K.R.Arora for soil mechanics,
Read Full post...
8

L&T Get ( graduate engineer trainee ) interview

22.9k views
Rishabh JainFresherSelected
Application
I was interviewed on-campus at NIT Bhopal for Get ( graduate engineer trainee ) role at L&T
Interview Process
Test HR Interview
Round 1

Test

Interview Experience
The test comprised of questions of Aptitude and English. The test was a very basic level test.
Round 2

HR Interview

Interview Questions
  • Question 1: Tell me About Yourself?
  • Question 2: Why do you want to join L&T?
  • Question 3: Why we should hire you?
Interview Experience
As i entered the interview room, i was asked to answer these three questions in order.
During the interview, most of the questions were related to my project and training and some questions were related to public transport systems and traffic management as all my projects were related to Transportation Engineering.
The interview was very cool. The HR was very friendly. It was more of general kind of discussion. During my interview, Neither once did i feel stressed. The HR's make the interview very comfortable for you.
Interview Tips
1. Confidence is must. You should be confident in whatever answers you give. They are not looking for very good technical background. they just check how confident you are with your work.
2. Interview can happen in any language. so don't bother even if you are not very good with English.
3. You set the domain of your interview. so first speak about those things which you want to highlight and which provides you a strong background.
Skills

Skills Tested

Skill Tips
Always be Confident!! <br /> Confidence is the only key.<br /> Also have a thorough knowledge of your training and projects.
General Tips
Be confident during your interview. Always answer Boldly. Don't have fear of English. they recruit to perform technical work and not showcase your communication skills.
Motivation for applying
L&T is a leading company in civil engineering which has its legs spread in all domains and all across the world. Also opportunities to grow are excellent in this company.
Read Full post...
9

L&T Get ( graduate engineer trainee ) interview

11.5k views
Rohit ChakrabortyFresherSelected
Application
I was interviewed on-campus at BIT Mesra for Get ( graduate engineer trainee ) role at L&T
Interview Process
Test Technical + HR Interview
Round 1

Test

Interview Experience
Top 30 people from civil engineering branch were selected for the aptitude round, which consisted of 40 questions of aptitude/maths and 40 questions of english to be answered in 1 hour.
Interview Tips
Since I'm quite fluent in English, I dedicated 45 mins in maths and 15 minutes in English. Be sure to clear sectional cutoffs and not being stuck in a single section (this is a very vital point to be taken care of). Questions were easy and anyone preparing for CAT or even referring to India bix, the test will be a cake-walk.
Round 2

Technical + HR Interview

Interview Questions
  • Question 1: What is concrete mix?
  • Question 2: What is the meaning of M-35 grade of concrete?
  • Question 3: Give an overview to design a building including earthquake resistant characteristics?
  • Question 4: Difference between end bearing pile and friction pile?
  • Question 5: Draw a cross-section of a road indicating its various components? (Since my project was road/transportation based)
  • Question 6: What is curing? FOQ (Follow up question): Will curing be required in the North pole also?
  • Question 7: Length of a single lane road and a double lane road? (Again project related)
  • Question 8: Difference between 1 way slab and 2 way slab, what type of slab does this room have?
Interview Experience
The questions were quite basic. The HR round consisted of the interviewer pouncing question after question about my hobby (quizzing), I guess more questions of general knowledge asked than technical questions. He asked if I was ready to relocate anywhere in India or not?
Interview Tips
Just keep confidence, If you have certificates (specially of sporting events) do bring them along. Have a high CGPA, because L&T usually hires toppers. (I wasn't one of them though)
Read Full post...
10

L&T Get interview

29.1k views
Kanchan PandhareFresherSelected
Application
I was interviewed on-campus at Vidyalankar Institute of Technology Mumbai for Get role at L&T
Interview Process
Test Group Discussion Technical Interview HR Interview Paragraph writing
Round 1

Test

Duration
60 Minutes
No. of Questions
60 questions
Test Sections
  • Section 1: Quant & Basic Mathematics (20 Q).
  • Section 2: Logical Reasoning
  • Section 3: English
Interview Experience
Section 1 was quant. It was very simple. Practice basic questions
Logical reasoning and English sections were slightly tough than quantitative.Overall aptitude was simple and easy to pass
Interview Tips
Try to attempt all questions because there is no negative marking.
Round 2

Group Discussion

Duration
20-25mins Minutes
Group Discussion Topic
Is India a male dominant country?
Interview Experience
Spoke about the Haryana district with the live examples of two sisters Geeta Kumari and Babita Kumari, who won gold medals in wrestling.
Also mentioned about Saina Nehwal.
Basically I agreed that India is not a mail dominant country.
Interview Tips
Give examples as much as you can, examples portray how well you understand the topic. The examples should be about recent happenings
It also shows how much are you aware about the current scenario.
Stick to one side, if you are speak the first point for the topic, that is "India is a male dominant country" then don't go against this during the second point
No of times you speak, also matters.
Round 3

Technical Interview

Interview Questions
  • Question 1: Write a program to display prime numbers from 1-35
  • Question 2: Write a program to reverse a string
  • Question 3: What is polymorphism?
  • Question 4: Is method overloading possible in c++?
  • Question 5: One question on database to find the max mks from student table
  • Question 6: BE project, what softwares you will use?
  • Question 7: Can we write int func() and int func(int a) in a single class?
  • Question 8: How to insert a java code in <html> </html> (html tags) 9.
  • Question 9: Features of OOPS
  • Question 10: Any questions about the organization?
Interview Experience
I didn't answer 2 questions, it is fine if you don't answer the question rather than making the interviewer fool
Interview Tips
Prepare core subjects very well
Be prepared to answer the last question, it shows your interest in the company
Round 4

HR Interview

Interview Questions
  • Question 1: Previous companies attended by you
  • Question 2: Why didn't you clear the aptitude?
  • Question 3: What you learnt from this failure?
  • Question 4: Are you ready to relocate? (she asked me this question 3 times)
  • Question 5: About weakness which was mentioned in the form given by them
  • Question 6: Any question about the organization?
Interview Experience
It was my third company in campus. So the first question was surely expected, and I was prepared for that. If you clear the technical round then the ball is in your court. You can ace the HR round.
Interview Tips
Just be yourself. Be prepared with basic  HR questions.
Round 5

Paragraph writing

Interview Experience
Topic - Effect of public holidays on Indian economy
Interview Tips
Write atmost one page.3/4th page is also fine.
Resources

Preparation materials

Books
  • RS Agarwal,
Read Full post...
SignUp/Login
1-Step Login | Get unlimited access!