Hero MotoCorp

Hero MotoCorp Interview Questions and Tips

Showing 11 - 20 of 21 interviews

11

Hero MotoCorp Get ( graduate engineer trainee ) interview

4.6k views
ROJIN RAJFresherSelected
Application
I was interviewed on-campus at NIT Surathkal for Get ( graduate engineer trainee ) role at Hero MotoCorp
Interview Process
Test group disscussion Technical Interview
Round 1

Test

Test Sections
  • Section 1: ONLINE TEST
Interview Experience
Online Test It was an MCQ test. Time limit was one and half hour. It consisted of two sections:
1) Aptitude Questions pretty simple and typical aptitude questions
2) Technical questions Covered almost all topics in ece.Questions were very basic.
Round 2

group disscussion

Interview Experience
Based on the online test 6 people from ECE were shortlisted.
Round 3

Technical Interview

Interview Experience
There was only one Technical Round asked me about my final year project and asked few questions on multplexing, cross talk and implementation of different gates.
General Tips
Start preparing during vacation itself.Concentrate on topics like digital electronics,digital system design,embedded systems and computer architecture if you are looking for a job in hardware/digital profile.Knowledge on pointers and data structures also will be very much helpful during interview process. Be prepared with all the projects you have included in your resume.

It was a nice experience and a rewarding one at the end .
Read Full post...
12

Hero MotoCorp Get interview

4.4k views
FresherSelected
Application
I was interviewed on-campus at IIT Kharagpur for Get role at Hero MotoCorp
Interview Process
Group Discussion Test Interview
Round 1

Group Discussion

Interview Experience
The selection process for post graduate students started with group discussion. The eligible students were divide into groups of 10 or 12. A general topic was given to be discussed (E.g. Role of women in society, computers kill creativity etc). At the end of the discussion, the representative of the company might ask some queries to a few of the students (two or three), based on their statements in the GD.
Interview Tips
Do’s: Write down your points in a piece of paper. Speak them clearly when you get your chance. Try to make your points brief, clear and relevant. 
Don’ts: Do not try to overdo things. Please keep in mind that you ought to give opportunities to other group members.
Round 2

Test

Test Sections
    Interview Experience
    You will be given a form and will be asked to tick your qualities. Please do it honestly. This was not an elimination round. In fact this was not found relevant in the whole process of recruitment.
    Round 3

    Interview

    Interview Experience
    There were two representatives of the company in the interview panel-one from technical section and the other from HR. The technical part of the interview was mostly based on the topic (There could be extra questions if your CGPA is low). A relevant topic could help (If the topic is relevant, mention it in your CV as well). The HR questions were very straightforward. They might ask certain things from your CV as well. The location preference was one prime concern for them. HERO MOTOCORP is setting up a new R&D division in Jaipur and so wanted people to be willing to go to Jaipur. So they were very keen to know if we had any problem in working at Jaipur.
    Skills

    Skills Tested

      Skill Tips
      Proficiency in CFD softwares could help
      General Tips
      Though CGPA is not the prime criteria of HERO MOTOCORP, we were told that they were looking for an optimum combination of different parameters (they didn’t reveal the parameters). Project topic can help a lot, especially if it is of interest to the company. Being a good team man and good communicator would help as group discussion would be the first step in the recruitment process.
      Read Full post...
      13

      Hero MotoCorp Get interview

      4.3k views
      Ankit JainFresherSelected
      Application
      I was interviewed on-campus at NIT Bhopal for Get role at Hero MotoCorp
      Interview Process
      Test Group Discussion Technical Interview
      Round 1

      Test

      Test Sections
      • Section 1: Technical
      • Section 2: aptitude
      Interview Experience
      Pretty straightforward, basic questions from major subjects like fluid, SOM , production and thermo-dynamics. Aptitude was very basic (RS Agarwal level). If your english is weak, you might find the verbal and comprehension section a bit tough.
      Interview Tips
      No sectional cutoff, so if your technical subjects are weak, you can make it up in the aptitude section and vice-versa.
      Round 2

      Group Discussion

      Group Discussion Topic
      Social topics (usually)
      Interview Experience
      Don't expect the campus GD to be a civilized one. The key is to keep your cool. Strong points and confidence in your communication will sail you through.
      Interview Tips
      Try to avoid repititive and digressive point.
      Round 3

      Technical Interview

      Interview Experience
      There were two interviewers in the panel that I faced, both engineers. Most of the questions were based on my training and projects. Honestly, I couldn't answer 40% of them.
      Interview Tips
      Nobody is expecting you to answer every question that is being asked, so don't panic. If you don't know something or cannot recall it, convey the same to the interviewer. Be confident and keep a smiling face.
      Best of luck for the placement season :)
      Skills

      Skills Tested

      • technical knowledge
      • personality
      General Tips
      Be prepared before you sit for any company's recruitment process. A study of company's history and background would gain you some extra points.
      Funny Moments
      After placement GPL :p
      Read Full post...
      14

      Hero MotoCorp Get interview

      4.3k views
      VISHAL VIKRAM AHIRWARFresherSelected
      Application
      I was interviewed on-campus at MDI Gurgaon for Get role at Hero MotoCorp
      Interview Process
      Test Group Discussion Technical Interview
      Round 1

      Test

      Test Sections
        Interview Experience
        That was an online writtern test having two section (technical & aptitude).Paper was not that easy and not too tough.
        Interview Tips
        For all the mechanical students study manufacturing proccess,som,thermodynamics,aptitude,ic engine,hmt,fluid dynamics.80% of the writtern paper comes from these subjects only.plz visit and perpare the question from site indiabix.com,good technical and aptitude question are there.
        Round 2

        Group Discussion

        Group Discussion Topic
        India's readiness towards Dissaster.
        Interview Experience
        In our college group discussion is the just like debate.No one will give you the chance to speak.You will have to find your place in the discussion.
        Interview Tips
        Prefer to start the GD and if not so then try to put your point within 3-5 min of start of your GD.only say 2-3 distinct point after that allow other to put their views.if you see a person not utter a single word in gd give him chance.Also try to conclude the GD.
        Round 3

        Technical Interview

        Interview Experience
        it was not purely technical.My interview is both tech and HR in same interview
        Interview Tips
        be calm and be yourself.dont try to fool the interviewer.they know more then us unlike our college viva.always perpare 2-3 subject,training,project for interview....BEST OF LUCK.......
        Skills

        Skills Tested

        • technical knowledge
        • speech
        • personality
        Skill Tips
        be yourself dont pretend
        Read Full post...
        15

        Hero MotoCorp Sales executive internship interview

        120 views
        Shivam SrivastavaFresherSelected
        Application
        I was interviewed on-campus at Rkgit for Sales executive role at Hero MotoCorp
        Interview Process
        Group Discussion
        Round 1

        Group Discussion

        Group Discussion Topic
        Surgical strike
        Skills

        Skills Tested

        • Communication And Confidence
        Read Full post...
        16

        Hero MotoCorp Get interview

        3.9k views
        N Lakshmi AmulyaFresherSelected
        Application
        I was interviewed on-campus at IIT Madras for Get role at Hero MotoCorp
        Interview Process
        Test Group Discussion Interview
        Round 1

        Test

        Duration
        60 Minutes
        Test Sections
        • Section 1: Written
        Interview Experience
        Quant , Verbal and Core
        Some basic concepts from class notes. But most part of the test had things that were not taught. Being fast at quant will help
        Round 2

        Group Discussion

        Duration
        20 Minutes
        Group Discussion Topic
        Should public organizations be privatized
        Interview Experience
        You need not speak throughout the GD you should make certain good points and complement others points. Giving examples to substantiate your point helps.
        Round 3

        Interview

        Interview Experience
        Some questions on IC engines and also operation management ( since my minor was IE) . Mostly the questions were on the projects and internships.
        Being from the south whether i will be able to manage in the north. As I am a girl will I be able to handle the situations etc.I think because of my CGPA and also my internships which were automobile related helped.
        My preparation was not good I just revised my class notes and prepared on my internships and projects.
        Interview Tips
        Revised my core fundaes. Prepared about my internships and projects. For HR i think you just have to be spontaneous and convince them that you are the one for the job.
        Skills

        Skills Tested

          General Tips
          For core companies revise basic topics like IC engines and design of machine elements and also my favorite topics like heat transfer. I think having practical rather than bookish knowledge helps. Mostly

          I used my class notes.

          Be thorough with your resume and also the important core courses. Having mock GDs and interviews will help a lot.
          Read Full post...
          17

          Hero MotoCorp Get interview

          4k views
          Shine EapenFresherSelected
          Application
          I was interviewed on-campus at NIT Warangal for Get role at Hero MotoCorp
          Interview Process
          Test Group Discussion Technical Interview HR Interview
          Round 1

          Test

          Test Sections
            Interview Experience
            The written test was of 50 questions for 30 mins. The test consisted question of technical, quantitative, reasoning and English. The difficulty level is of average. The most important factor that matters is the usage of time. The technical questions covered all the important domains of mechanical engineering.
            Round 2

            Group Discussion

            Group Discussion Topic
            Is Arvind Kejriwal right in forming the party and contesting for the elections. (10 minutes)
            Interview Experience
            · Pointed out his drawbacks.· The people support· The cause he is fighting for· The overall image· The long term goals· Party manifesto· Association with other parties
            Round 3

            Technical Interview

            Interview Experience
            The overall experience was good. The interview was fun and they asked questions related to my experience which gave me the advantage.
            Interview Tips
            They will ask questions about the
            · Intern ship and project details· what I gained/learned from the intern ship· final year project· favourite topics based on the subjects
            Round 4

            HR Interview

            Interview Experience
            · tell about yourself· why you are interested to join the company· long term plans· any questions
            Skills

            Skills Tested

              General Tips
              Try to stay calm during the interview and know your basics of mechanical engineering. Remember what you have done during the intern ship/training/project time.
              Read Full post...
              18

              Hero MotoCorp Get interview

              3.9k views
              FresherSelected
              Application
              I was interviewed on-campus at IIT Kharagpur for Get role at Hero MotoCorp
              Interview Process
              Test Group Discussion Technical Interview
              Round 1

              Test

              Duration
              30 Minutes
              Test Sections
                Interview Experience
                30-40 questions in 30 minutes. The paper consisted of technical questions from one’s department and some quantitative questions as well. Do the quantitative questions first to maximise your score. Technical Questions are tough in general.
                Round 2

                Group Discussion

                Duration
                20 Minutes
                Group Discussion Topic
                Impact of television soaps and game shows on the people of India
                Interview Experience
                The discussion was carried out for about 20 minutes.
                Interview Tips
                Speak fluently and add points of value to the discussion rather than repeating same arguments.
                Round 3

                Technical Interview

                Interview Experience
                The interview went on for 15-20 minutes and consisted of Technical as well as HR questions.
                Technical Questions (Industrial Engineering):-
                1) What is OEE (Overall Equipment Effectiveness)? (from my internship)
                2) What is Queuing Theory?
                3) What is Kaizen?
                4) What is pnp/npn transistor? (Surprise Question)
                5) Elements of an Assembly Line.
                HR questions
                1) Family Details
                2) Hobbies
                3) Your best friend and what do you like about him
                In general HR questions were easy.
                Interview Tips
                Do read about your Internship in detail. Prepare technical and expect surprise
                questions. Be cool throughout the process.
                Skills

                Skills Tested

                  Read Full post...
                  19

                  Hero MotoCorp Get interview

                  3.8k views
                  FresherSelected
                  Application
                  I was interviewed on-campus at IIT Kharagpur for Get role at Hero MotoCorp
                  Interview Process
                  Test Group Discussion HR Interview
                  Round 1

                  Test

                  Test Sections
                    Interview Experience
                    A written test with common paper for ME and IM students and a separate paper for EC students. The test for ME and IM students comprised of 2 sections - mechanical and logical reasoning. The paper was very lengthy and the trick was to judge and attempt those questions which required less time.
                    Interview Tips
                    Don’t spend too much time on any question.
                    Round 2

                    Group Discussion

                    Group Discussion Topic
                    Reality shows and their effects on the Indian society
                    Interview Experience
                    An unmoderated GD with 10 people in a group. The topic was based on situations very close to reality . This round requires critical thinking and the usual rules in a group discussion are applicable.
                    Round 3

                    HR Interview

                    Interview Experience
                    A personal interview where the interviewer tries to find out more about you as a person.
                    Interview Tips
                    Just be straightforward and don’t lie to save your face.
                    Skills

                    Skills Tested

                      General Tips
                      CGPA between 8-8.5 necessary.

                      Good math, logic, and quantitative abilities as well as some programming skills.
                      Read Full post...
                      20

                      Hero MotoCorp Get interview

                      3.7k views
                      K.R AkshayFresherSelected
                      Application
                      I was interviewed on-campus at NIT Surathkal for Get role at Hero MotoCorp
                      Interview Process
                      Test Group Discussion Other Interview
                      Round 1

                      Test

                      Duration
                      30 Minutes
                      No. of Questions
                      50 questions
                      Test Sections
                      • Section 1: 25 core questions
                      • Section 2: 25 gen aptitude questions
                      Interview Experience
                      Written test (30 min & 50 questions which included- 25 core and 25 gen aptitude questions).
                      Round 2

                      Group Discussion

                      Interview Experience
                      Shortlisted candidates had a GD
                      Interview Tips
                      Be prepared for anything. GD topics can be very different and generally one cannot be aware of all possible topics and be prepared. So confidence and clarity of thought during the GD is important.
                      Round 3

                      Other Interview

                      Interview Experience
                      The candidates were further shortlisted for interview
                      Skills

                      Skills Tested

                        Skill Tips
                        Gate books for Tech stuff in test and interview was helpful.
                        General Tips
                        It was Challenging. Interview was a fun experience, it lasted for 5 minutes and I got the job while those with 45 min didn't. The only tech question was - define 'pressure'.
                        Read Full post...
                        SignUp/Login
                        1-Step Login | Get unlimited access!