Adani Power

Adani Power Interview Questions and Tips

Showing 11 - 20 of 28 interviews

11

Adani Power interview

7.9k views
BHOLENATH KISKUFresherSelected
Application
I was interviewed on-campus at NIT Warangal for Adani Power
Interview Process
Test Group Discussion Technical Interview HR Interview
Round 1

Test

Duration
60 Minutes
Test Sections
  • Section 1: Written Test
Interview Experience
Each section contained 75 questions.Aptitude was of simple english and maths questions.These can be solved easily. Technical part was a bit difficult.Questions were mainly from synchronous machines, power system n few were from other electrical subjects like digital and analog electronics .In electronics most of them were from BJT, MOSFET and FET .Time management is most as quantity of questions are more.
Round 2

Group Discussion

Duration
15 Minutes
Group Discussion Topic
Does luck dominates the selection in interview.
Interview Experience
We were 12 in a group.It was a simple topic.Each ofus were comfortable with this n contributed our views.Don't fight with each other.Let other speak,listen carefully then put your point.one of the member started GD n it ended with a conclusion.I gave some points n said firmly like hard work is the key to success.By our determination we make our luck etc.So whatever is in your mind let them come out in GD.Don't be dumb there.
Round 3

Technical Interview

Interview Experience
They asked my favourite subject n questions were asked from that.As i replied machine they started with DC machines their voltage n speed control,AC machines protection,bucholz relay etc.from Power system they asked about SIL,its formula,value n effect.
Round 4

HR Interview

Interview Experience
As usual they started with tell me about yourself.Why you wanted to be an engineer.
Skills

Skills Tested

    Resources

    Preparation materials

    Books
    • P.S. Bimra,
    • C.L. Wadhwa,
    General Tips
    Be prepared with basics of electrical engineering.
    Read Full post...
    12

    Adani Power interview

    5k views
    JEEBAN KUMAR SWAINFresherSelected
    Application
    I was interviewed on-campus at NIT Warangal for Adani Power
    Interview Process
    Test Group Discussion Technical Interview HR Interview
    Round 1

    Test

    Duration
    60 Minutes
    Test Sections
    • Section 1: Written Test
    Interview Experience
    There were 2 sections aptitude and technical having75 qus each. time given 4 each section was 30 min.tech paper was from fundamentals power system,machine,few fromelectronics.apti paper was very simple maths and english.
    Round 2

    Group Discussion

    Interview Experience
    They will give u few min to think after the topic is given.during that time try to write some points on a plane paper.don't shout and don't dominant others during gd.there must be a matter in your argument.be calm and confident.
    Round 3

    Technical Interview

    Interview Questions
    • Question 1: What is distance protection ?
    • Question 2: Different methods of distance protection ?
    • Question 3: Speed control of the dc machine(series and shunt) ?
    • Question 4: Types of losses in alternator ?
    • Question 5: What is ferranti effect ?
    Interview Experience
    All the technical questions from fundamentals.
    Round 4

    HR Interview

    Interview Questions
    • Question 1: Tell me about yourself ?
    • Question 2: What is your father doing ?
    • Question 3: Why you have low cgpa ?
    • Question 4: Tell me about an obstacle u have faced in your life ?
    • Question 5: Can u adjust if we we send u china?
    Skills

    Skills Tested

      Resources

      Preparation materials

      Books
      • R.S. Aggarwal,
      General Tips
      Don't panic for selection procedure .if the day is yours non one can stop you.be sound at your favorite technical paper. Your fundamentals should be good.for aptitude test go for R.S. AGGARWAL. best of luck!!
      Read Full post...
      13

      Adani Power interview

      4.7k views
      SUNIL SINGHFresherSelected
      Application
      I was interviewed on-campus at NIT Warangal for Adani Power
      Interview Process
      Test Group Discussion Technical Interview HR Interview
      Round 1

      Test

      Duration
      60 Minutes
      Test Sections
      • Section 1: Written Test
      Interview Experience
      Paper-1There was 75 Question in which consist of aptitude,Verbal English, Jumbling problem, very simple analytical problem.Paper-2There was 60 Question most of them was memory based very simple & basic Question.
      Round 2

      Group Discussion

      Duration
      20 Minutes
      Group Discussion Topic
      Is the corruption necessarry to get success ?
      Interview Experience
      I opened the GD...............by giving brief idea about the topic & participated throughout the GD.
      Round 3

      Technical Interview

      Interview Questions
      • Question 1: Draw modified Rankine Cycle.
      • Question 2: Implement the Regenerator & Reheater in modifiedrankine cycle.
      • Question 3: Some Question from the pump like specification of pumps, types & series & parallel combination of pumps.
      • Question 4: Then they asked me what is N.S.P.H.
      Round 4

      HR Interview

      Interview Questions
      • Question 1: Tell me about yourself.
      • Question 2: Tell me your three qualities.
      • Question 3: Why u want to join us.
      Skills

      Skills Tested

        General Tips
        Dear juniors no need to be panic......................they were seeking for basics not for..............??? Only there is bit of time management required.In apti...whether it is technical or non-technical. there was no negative marking. Although the selection process is very simple for normal candidate but try to manage things as well as it is possible for u.
        Read Full post...
        14

        Adani Power interview

        4.8k views
        K.R.CH.PHANI KUMARFresherSelected
        Application
        I was interviewed on-campus at NIT Warangal for Adani Power
        Interview Process
        Test Group Discussion Technical Interview HR Interview
        Round 1

        Test

        Duration
        60 Minutes
        Test Sections
        • Section 1: Written Test
        Interview Experience
        Aptitude and Verbal are asked in a paper and technical in the other.75 questions in each and given 30 minutes.
        Aptitude is very easy.Technical is entirely theoritical.
        Round 2

        Group Discussion

        Duration
        15 Minutes
        Group Discussion Topic
        Corruption is a necessaryevil in any Sphere
        Interview Experience
        After test shorlisted students are divided into batches 12 a group..and each group is given a topic.
        Time is precious...So speak ,listen and interpret. Dont make a shouting scene but let everyone express their
        views. Get to a good conclusion.
        Round 3

        Technical Interview

        Interview Questions
        • Question 1: Rankine cycle and modified rankine cycle-explain in h-s curve.
        • Question 2: Diesel and Otto cycle.
        • Question 3: What is the difference in combustion in the diesel and otto cycle?
        • Question 4: What is value of pressure at critical point in saturation curve?-(It is critical pressure see value in any graph)
        Round 4

        HR Interview

        Interview Experience
        HR is the main decider.The first question he asked everyone is that can I work anywhere(especially mundra).He
        asked about my family,about my career,my sad momentand how I felt,overcome that situation.
        Skills

        Skills Tested

          Read Full post...
          15

          Adani Power interview

          4.7k views
          PONNADA V S S SRIVATSAFresherSelected
          Application
          I was interviewed on-campus at NIT Warangal for Adani Power
          Interview Process
          Test Group Discussion Technical Interview HR Interview
          Round 1

          Test

          Duration
          120 Minutes
          Test Sections
          • Section 1: Written Test
          Interview Experience
          Quant questions are pretty much simple, the only challenge is the time factor(adequate)
          Technical questions are from varied topics.....refrigeration, manufacturing, ic engines,design..
          Basic and clear understanding of the topics is enough to clear the test
          Round 2

          Group Discussion

          Duration
          15 Minutes
          Group Discussion Topic
          Is corruption a necessary evil ?
          Interview Experience
          They just checked whether one can express his views clearly.... there is enough time to frame the argument , our group respected views of every one...no quarrels
          Round 3

          Technical Interview

          Interview Experience
          They asked me about my project..
          Heat exchangers parallel,counter ,crossflow, limited equations
          types of governors..
          Modes of heat transfer(gov eqns)
          Round 4

          HR Interview

          Interview Experience
          Tell abt ur self
          Future goals....
          How do you realise them..
          Are u willing to work in places far off
          What is the first thing that u would if u r made the director .
          Skills

          Skills Tested

            General Tips
            Brush up your math and simple verbal knowledge....

            As i have said basic and thorough understanding of thermal engg, heat transfer,strength of matrials, design,manufact (basics)..(mechanisms and automotive tech are freq asked in automobile and design co s ..)
            Read Full post...
            16

            Adani Power interview

            4.6k views
            ATUL TRIPATHIFresherSelected
            Application
            I was interviewed on-campus at NIT Warangal for Adani Power
            Interview Process
            Test Group Discussion Technical Interview HR Interview
            Round 1

            Test

            Duration
            60 Minutes
            Test Sections
            • Section 1: Written Test
            Interview Experience
            Aptitude Test had simple Quantitative questions with 50% questions for Verbal English(75 questions to be answered in 30 min).Technical also had 75 questions to be answered in 30 min.The questions were quite simple and were from IS Codes,structures etc like which code is used for steel structures,what is point of contraflexure etc.
            Round 2

            Group Discussion

            Duration
            15 Minutes
            Group Discussion Topic
            Students going for money over basic knowledge
            Interview Experience
            I gave my best,just had to speak few relevant points and also listened to others.
            Round 3

            Technical Interview

            Interview Experience
            Questions asked were about BMD SFD for SSB,Cantilever,Fixed beam,Portal frame and about structure of dam,grip length etc.
            Round 4

            HR Interview

            Interview Experience
            Questions asked were like tell me about yourself,Can you work extremely hard.
            Skills

            Skills Tested

              General Tips
              Just be cool,do as many questions as possible because there is no negative marking.For G.D. just speak some relevant points.So be confident and give your best shot.
              Read Full post...
              17

              Adani Power interview

              4.6k views
              S.NAGESWARA REDDYFresherSelected
              Application
              I was interviewed on-campus at NIT Warangal for Adani Power
              Interview Process
              Test Group Discussion Technical Interview HR Interview
              Round 1

              Test

              Duration
              60 Minutes
              Test Sections
              • Section 1: Written Test
              Interview Experience
              Apti test constituted 75 questions of quantitative,reasoning,verbal.all questions r objective vth multiple choice and are of basic type which can be answered in less than half min. And the technical test also has 75 questions of objective type with multiple choice on basic fundamentals comprising all topics. There was no negative marking and hence time factor plays a major role. Go through the entire question paper and attempt all questions.
              Round 2

              Group Discussion

              Duration
              15 Minutes
              Group Discussion Topic
              Engg students are interestd in salaries or fund learning
              Round 3

              Technical Interview

              Interview Experience
              Technical interview was very cool and simple. Basicquestions like what tests will u perform in the lab to analyze the charecteristics of given soil sample .
              Round 4

              HR Interview

              Interview Questions
              • Question 1: Tell me about yourself ?
              • Question 2: Where do u want to see urself after 5 years ?
              • Question 3: Are you willing to work in any place ?
              Skills

              Skills Tested

                Read Full post...
                18

                Adani Power interview

                4.5k views
                ANKUR PARASHARFresherSelected
                Application
                I was interviewed on-campus at NIT Warangal for Adani Power
                Interview Process
                Test Group Discussion Technical Interview HR Interview
                Round 1

                Test

                Duration
                60 Minutes
                Test Sections
                • Section 1: Written Test
                Interview Experience
                In aptitude test questions were very simple just they were checking the speed as one has to solve 75 questions. In technical test questions were asked from all the fields of civil engineering but maximum questions were from project management.
                Round 2

                Group Discussion

                Duration
                10 Minutes
                Group Discussion Topic
                What is important knowledge or money.
                Interview Experience
                In the gd those who spoke confidently got selected.
                Round 3

                Technical Interview

                Interview Experience
                Technical round was easy . they asked me about load on truss and its effect on various members.
                Round 4

                HR Interview

                Interview Experience
                They asked about my family background, my achievements, strength, weakness etc. . will i be able to work in field .
                Skills

                Skills Tested

                  General Tips
                  Prepare BMD and SFD and one subject. Answer confidently and show them that u are interested to work in their company.
                  Read Full post...
                  19

                  Adani Power interview

                  4.5k views
                  VALETI RAMESH BABUFresherSelected
                  Application
                  I was interviewed on-campus at NIT Warangal for Adani Power
                  Interview Process
                  Test Group Discussion Technical Interview HR Interview
                  Round 1

                  Test

                  Duration
                  60 Minutes
                  Test Sections
                  • Section 1: Written Test
                  Interview Experience
                  Technical test consists of Power Systems,Electric Machines and electronics(5 to 6 questions only) and in aptitude
                  simple mathematics. Each paper consists of 75 questions.
                  Round 2

                  Group Discussion

                  Duration
                  15 Minutes
                  Group Discussion Topic
                  Is India lagging in research behind west
                  Interview Experience
                  It is cool,just you have to take part in it.
                  Round 3

                  Technical Interview

                  Interview Experience
                  He asked 3 to 4 questions about synchronous and induction motor like difference between them and working principles.
                  Round 4

                  HR Interview

                  Interview Experience
                  They asked common questions like tell me about yourself, are you prepared for working at any place, do you know hindi etc. HR interview is main and its easy too.
                  Skills

                  Skills Tested

                    General Tips
                    Don't be panic, if you pass in written test it is easy to get into the company. Be confident about your answers.
                    Read Full post...
                    20

                    Adani Power interview

                    4.6k views
                    RISHABH RAY CHAUDHURYFresherSelected
                    Application
                    I was interviewed on-campus at NIT Warangal for Adani Power
                    Interview Process
                    Test Group Discussion Technical Interview HR Interview
                    Round 1

                    Test

                    Duration
                    60 Minutes
                    Test Sections
                    • Section 1: Written Test
                    Interview Experience
                    Aptitude test was quite easy . In technical written test questions were asked from all the facets of civil engineering . Questions were from project management and environmental engineering mainly.We had to do 75 questions in 30 mins in both technical and aptitude written test.
                    Round 2

                    Group Discussion

                    Duration
                    10 Minutes
                    Group Discussion Topic
                    Why Indian youth are running after money
                    Interview Experience
                    I presented well my point of view with proper logic. I guess it was my day....I got selected....12 out of 16 selectedin written test were shortlisted for interview.
                    Round 3

                    Technical Interview

                    Interview Experience
                    Questions were asked from project work.
                    Round 4

                    HR Interview

                    Interview Experience
                    Question was asked to tell me about myself, family and where do I see myself 5 yrs from now.
                    Skills

                    Skills Tested

                      General Tips
                      Dont miss the ppt of this company.....and give ur best....BEST OF LUCK
                      Read Full post...
                      SignUp/Login
                      1-Step Login | Get unlimited access!